Another short update on our HBX360 lathe…
[toc]After rebuilding of the parts we have now started re-assembling the machine. First stop was the massive 5.5KW motor which rests on 4 M20 bolts for easier alignment. Second came the mechanical break – another little highlight on this machine. Feed gear box and the electrical control box have also been attached again.
Of course we wanted to get a first glimpse at how the machine soon will look like and attached some of the sheet metal parts… Looks like the long hours of work have payed of. Next we will complete some smaller assemblies in the main drive area and complete the new gear levers.
Gear Levers
Just wow. The new water-jet cut stainless steel gear sift levers are true eye-candy. The original levers were made form simple sheet metal, bent and painted.
In the next weeks Fabian will WIG weld the levers to the new shafts. I am also considering buying stainless index bolts for the levers… If just these things would be less expensive (40 Euro per piece…)
Painting of the Apron
On our first attempt the paint got mixed with some residual oil hiding in a bling spot. Back to the beginning then, removing the full paint coat again.
Break
The main drive components and the mechanical break are back in the machine.
Multifix B
eBay had some used Multifix B quick change tool holders on offer. The price was ok and the condition acceptable. This way we are starting our lathe adventures with a total of 5 tool holders.
Electrical control box
Mounting plate, cable glands and the most important wiring are back on their places. Newly painted (and without gunk) the control box looks much better now.
To get the lathe up and running faster we decided not to alter the electrical system too much. At a later stage we will swap the glas fuses for proper circuit breakers, add some new relays and a little bit of “intelligence”.
Urgent changes included: New wires for the e-stop and control switches as well as wire end-sleeves for all connections.
Приезжайте за комплектующими на Украину, можем поискать болты для рычагов ) Хороший станок. Молодцы.
если нужно выточить болты из нержавейки обращайся пришли только чертежи думаю цена вопроса приятно удивит
Sehr schöne Maschine hast du da ergattert. Die Franzosen bauen sehr gute Maschinen.
Habe selber einen Franzose in meiner Werkstatt, eine Ernault Sumoa Fräsmaschinen.
Maschinen mit 3000 u/min sind nicht oft anzutreffen.
Hallo Haris,
Ja, das stimmt. Ich bin nach wie vor sehr beeindruckt von den technischen Finessen, welche die Franzosen da verbaut haben!
Sehr geehrter Herr Ueberbach, Guten Tag.
Unsere Firma befaßt sich seit merh als 30 Jahren mit Vertrieb, Reparatur und Wartung
von Werkzeugmaschinen aller Art. Jetzt haben wir ein kleines Problem, zu dessen Lösung Sie vielleicht beitragen könnten. Wir setzen derzeit das stufenlose Getriebe
einer Cazeneuve HBX-360 instand. Leider haben es meine Serviceleute bislang
nicht geschafft, die vordere Regelscheibe des unteren Variators (ist direkt mit dem
Antriebsmotor verbunden) von der Vielkeilwelle zu ziehen. Das Teil ist irgendwie
mittels eines Stiftes etc. gesichert. Sie haben eine solche Maschine sehr aufwendig restauriert. Können Sie uns einen Tipp geben, wie diese Scheibe zu entfernen ist?
Ich danken für Ihre Mithilfe und gratuliere zur Top-Restuarierung Ihrer HBX-360.
In diesem Sinne verbleibe ich,
mit besten Grüßen aus Alzenau
Kopp
Tel.: 06023 7844